3 WORK
3.5
3.6
3.7
10
Installing the frame protector
S05492-11
Installing front fender
S05339-10
Charging the 12-V battery
Warning
Risk of injury 12 V batteries contain harmful substances.
–
Keep 12 V batteries out of the reach of children.
–
Keep sparks and open flames away from 12 V batteries.
–
Only charge 12 V batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging 12 V batteries.
Minimum clearance
–
Do not charge deeply discharged 12 V batteries if the charge is already below the minimum voltage.
Minimum voltage before the start of the charge
–
Dispose of 12 V batteries correctly if they have less than the minimum voltage.
–
Position the left frame protector.
–
Insert the right frame protector from below and push it to the
rear.
–
1
Mount screws
with the bushings and tighten.
Guideline
Screw, frame protec-
tor
–
Secure the frame protector with cable ties.
Main work
–
Position front fender. Mount and tighten screws
Guideline
Remaining screws,
chassis
Finishing work
–
Install the start number plate. (
1 m (3 ft)
9 V
M5
3 Nm (2.2 lbf ft)
1
and
M6
10 Nm (7.4 lbf ft)
p. 13)
2
.