Connectors; Product Installation - Nice WEGO Complete Manual

04 - CONNECTORS

05 - PRODUCT INSTALLATION

The WeGo Converter can be installed inside a 4x2 light box (built-in or overlapping) for better "camouflage" of the
product, it can be fixed by a double face to any surface or even "loose" in the installation (as long as it is not visible
and easily accessible).
The WeGo Converter is connected to the Nice equipment via RS485 using a proprietary communication protocol.
Therefore, it is recommended to use cables with a length of less than 1000 meters.
2-WAY CONNECTOR
PIN WIRE COLOR
1 Red
Black
2
8-WAY CONNECTOR
PIN WIRE COLOR
1 Brown
2 Gray
3 Green
4 Brown
5 Gray
Yellow
6
Black
7
8 Red
9-WAY CONNECTOR
PIN WIRE COLOR
1 Blue
2 White
3 Green
4 White
Black
5
6 Purple
Yellow
7
Yellow / White
8
9 Gray
FUNCTION
12/24VDC (+)
GND (-)
FUNCTION
Relay 2 (NA)
Relay 2 (NF)
Relay 2 (Common)
Relay 1 (NA)
Relay 1 (NF)
Relay 1 (Common)
GND (-)
12VDC (+)
FUNCTION
Serial RS485 Channel A
Serial RS485 Channel B
Wiegand Data 0 input
Wiegand Data 1 input
GND (-)
Wiegand Data Output 0
Wiegand Data Output 1
Activation button (pushbutton)
Door sensor
ENGLISH 19