Blender Quick Reference Guides; Cleaning And Maintenance - Cuisinart SmartPower Duet IB-9570 Instruction Booklet

QUICK REFERENCE GUIDE
FOR BLENDER FUNCTION
To activate blender
To begin blending
To change speeds
To pulse
To crush ice
To stop blending and deactivate blender
To stop blending in Pulse or Ice Crush mode
To stop blending in Stir, Chop, Mix, Purée,
or Food Processor mode
SPEED SELECTION GUIDE
FOR BLENDER FUNCTION
Refer to this guide to choose the best speed for your desired result.
Ingredient/Recipe Speed
Reconstituting frozen orange
juice concentrate Stir
Mayonnaise Stir
Salad dressings Stir
Nuts Chop
Whipping cream Mix
Bread crumbs Mix
Grating citrus zest Purée
Milk shakes Purée
Baby food Purée
Health drinks Food Processor
Frozen cocktails Food Processor
Grinding hard cheese Food Processor
Spices Food Processor
Ice Ice Crush
Press On- The blender is in On mode.
Press desired speed button.
Press desired speed button.
In On mode press Pulse, then press and
release desired speed button as needed.
In On mode, press and release Ice Crush
button as needed.
Press Off button.
Release button.
Press speed button again. This will return
the blender to On mode. Press Off button
to turn blender off.
Result
Smooth and full-bodied
Thick and creamy
Desired consistency
Coarse to fine
Thick topping
Uniformly fine
Uniformly fine
Smooth and creamy
Smooth and creamy
Smooth and creamy
Thick and slushy
Coarse to fine
Coarse to fine
Snowy

CLEANING AND MAINTENANCE

®
Always unplug your Cuisinart
Processor from the electrical outlet before cleaning. The blender is
made of corrosion-resistant parts that are easy to clean. Before first use
and after every use, clean each part thoroughly. Periodically check all
parts before reassembly. If any part is damaged or blender jar is
chipped or cracked, DO NOT USE BLENDER.
Remove the blender jar from the motor base by lifting straight up and
away. Twist off the locking ring by turning counterclockwise. Remove
the cutting assembly and rubber gasket. Wash in warm soapy water;
rinse and dry thoroughly. Place the locking ring in the upper rack of the
dishwasher or wash in warm water.
CAUTION: Handle the cutting assembly carefully. It is SHARP and may
cause injury. Do not attempt to remove blades from cutting assembly.
Remove the blender jar cover and the measured pour lid. Wash in warm,
soapy water; rinse and dry thoroughly, or place in the upper rack of the
dishwasher. The blender jar should be washed in warm soapy water and
rinsed and dried thoroughly. The blender jar can also be placed upside
down in the dishwasher.
Finally, wipe the motor base clean with a damp cloth to remove any
residue, and dry thoroughly. Never submerge the motor base in water or
other liquid, or place in the dishwasher.
Tip: You may wish to clean your blender cutting assembly as follows:
Squirt a small amount of dishwashing liquid into assembled blender jar
and fill halfway with warm water. Run on Stir for 15 seconds. Repeat
using clean tap water. Empty blender jar and carefully disassemble
parts. Wash cutting assembly, gasket and locking ring in warm, soapy
water. Rinse and dry all parts thoroughly.
®
SmartPower Duet Blender/Food
7