KitchenAid 5KHBC4 Series Owner's Manual page 7

PRODUCT USAGE (CONTINUED)
5.
Press the LOCK switch to unlock the Professional Hand Blender, then press and hold the
POWER/PULSE Trigger to activate.
For best results, insert Professional Hand Blender with Blending Arm attached into the pot
or bowl containing ingredients at an angle. Use the Removable Secondary Handle for
better stability. Stop the Professional Hand Blender before removing it from the pot or bowl
to avoid splashing.
Rest the Professional Hand Blender on the bottom of the pot or bowl momentarily, then
hold at an angle and slowly draw it upwards against the side of the pot or bowl. As the
Professional Hand Blender is drawn up you will notice the ingredients from the bottom of
the pot or bowl being drawn up. When the ingredients are no longer being drawn up from
the bottom, return the Professional Hand Blender to the bottom, and repeat the process
until the ingredients are the desired consistency.
Using a light circular motion from your wrist, draw the Professional Hand Blender up
slightly and let it fall again into the ingredients. Allow your wrist motion and the weight of
the Professional Hand Blender to do the work. Use the Removable Secondary Handle, if
needed, for extra stability while mixing.
6.
When blending is complete, release the POWER/PULSE Trigger before removing the
Professional Hand Blender from the mixture.
7.
Unplug immediately after use, before removing or changing attachments.
IMPORTANT:
If a piece of food becomes lodged in the guard surrounding the blade, follow these instructions:
1. Release the POWER/PULSE Trigger and unplug the Professional Hand Blender.
2. Use a spatula to remove the food lodged in the plastic guard. Do not use your fingers to
remove lodged food.
3. Plug the Professional Hand Blender back into the electrical outlet and resume operation.
USING THE PROFESSIONAL HAND BLENDER WITH THE WHISK
ATTACHMENT
1.
Insert the Whisk Attachment into the Motor Body and twist to lock. The attachment mark
on the whisk should line up with the bottom of the motor bell when fully attached.
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
2.
Plug the Power Cord into an earthed outlet.
3.
Set Professional Hand Blender to your desired speed on the Speed Control Dial.
4. Insert the Whisk into the mixture.
NOTE: The Professional Hand Blender should only be immersed in liquids the length of the
attachment. To avoid damage to the Hand Blender, do not submerge beyond the seam of the
blending attachment. Do not immerse the Motor Body into liquids or other mixtures.
WARNING
Electrical Shock Hazard
7