Advertisement
DIN Rear-mount
Installation using the screw holes on the
sides of the unit.
Ty
Remove the frame.
in tne
Into the
Fastening the unit to the factory radio
mounting bracket.
3.Select a position where
the ¢
w holes
the bracket and the screw holes of the main
unit become aligned (are fitted), and tight-
en the screws at 2 places on each side. Use
either truss screws (5 « 8mm) or flush sur-
face screws (5 ~ 9 mm), depending on the
shape of the screw holes in the bracket
.Screw
.Factory radio mounting bracket
.Dashbord or Console
our
Advertisement
