Advertisement
QUICK START GUIDE
For the LGX® PRO METAL
MOUNTING HOLES
For the LGX PRO METAL offers eight different mounting hole
locations for different uses. Side holes may be used for
peripherals such as accelerometers or toolhead boards and
in many cases also for mounting the extruder to a carriage
while the interface holes are intended for mounting a Slice
Engineering hotend like Mosquito or Mosquito Magnum+.
The bottom M3 holes are ideal for mounting the LGX PRO
METAL to a carriage.
The front holes may also be used for mounting as well as
the motor back holes, using the included hex studs.
www.bondtech.se
Page 4/8
Advertisement
