QUICK START GUIDE
For the LGX® PRO METAL
QUICK START GUIDE
Read this Quick Start Guide for proper extruder installation.
www.bondtech.se
Each LGX® Pro Metal extruder is supplied with:
•
1x LGX® Pro Metal 1.75mm feeder;
•
1x Custom Nema17 30mm pancake stepper
motor;
•
1x Metal Push-in fitting M7 4mm;
•
1x 2mm Hex Key (recommended tool);
•
1x Product Line Information Brochure;
•
1x Powered By Bondtech sticker.
Also shipping with additional accessories:
•
4x M3x23 mm Stud with 5mm Hex with M3x4
thread;
•
30mm PTFE tube to use in the Direct Drive
Interface Plug.
Page 2/8