REMOVING FROM STORAGE
As fans are removed from storage to be installed in their
final location, they should be protected and maintained
in a similar fashion until the fan equipment goes into
operation.
Prior to fully assembling and installing the fan and
system components, inspect the fan assembly to make
sure it is in working order.
1. Check all fasteners, set screws, propeller, motor
base and accessories for tightness.
DRAWN BY
ECO
LI_X
2. Rotate the propeller by hand and assure no parts are
DATE
ENG. REF.
KUNSHAN, CHINA
02/11/2009
TITLE
SUPERSEDES
SCALE
rubbing.
CAD DRAWING NO.
1/3
B
3. Ensure proper propeller clearance and alignment
around the entire housing. Adjust the motor plate
accordingly to achieve this clearance.
Propeller
Clearance
Recommended Propeller Clearance
Unit Size
31
36
41
Blade
Interior of tube
Hub
Minimum Clearance
0.125 in. (3.2 mm)
0.125 in. (3.2 mm)
0.125 in. (3.2 mm)
Table of Contents
Receiving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Fan Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Infrequent Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
®
GJX GreenJet
3