PSB NG-SR-21-4-DDP Instruction Manual page 26

Message
NG-SR IOM
Purpose
Prompt to operator that
blower circuit breaker is
OFF.
Prompt to operator that
maintenance reminder for
filters, and moisture
analyzer has been reset.
Compressor run time has
exceeded preset if
enabled.
Enabled operator to select
which type of message to
review.
Indicates to operator that
end of message history
has been reached.
Provides operator
feedback on F1 key press
to start regeneration
cycle.
Visibility Trigger
Pressing F1 to start
regeneration
"Login to reset" button
pressed and proper
ADMIN code has
been entered.
Time limit reached or
"Return" button
pressed but no regen
cycle initiated.
Pressing F4 key
Pressing F4 key when
last message in
history is reached.
Regen code has been
entered.
25
Clear condition
5 second time delay
or other action.
5 second time delay
or other action.
"Return" button
pressed delays
message for 6
compressor run
hours.
15 second time delay
or message type
button pressed.
5 second time delay
or other action.
Regeneration cycle
started or 5 second
time delay.
PSB INDUSTRIES