Advertisement
TROUBLESHOOTING
Symptom
Probable cause
Remedy
No sound
@
Pin plugs and/or amplifier terminals are dirty.
@
Player is in pause mode.
The disc is loaded with the label side leftward.
Output cables are connected incorrectly or loosely.
e
incorrect operation of stereo amplifier.
@
Connect properly.
sound volume controls.
@ Clean away dirt.
@
Press ® or tl
®
Check the settings of ampliffer switches and
®
Reload the disc with the label side rightward.
When
playback is started,
it
| stops immediately.
| Pausesor
stops during playback.
e
Disc is inserted in the wrong way
e@ Smudges, etc., on the disc
rightward,
it again
@
insert the disc correctly with the label side
@
Clean the smudges from the disc and then play
Remote contro! will not func-
tion.
e
Dead batteries.
Obstruction between player and remote control
unit
@
Replace batteries.
struction.
i
e
Relocate remote control unit or remove ob-
and then on again, or unplug the AC power cord and then plug it in again
SELF-DIAGNOSTICS FUNCTION
The unit incorporates the self-diagnostic function
oO
Re]
Bil
Pad
>
ot
oO
P=
w
Display on the unit
ins.
rane.
:
Hod
Service No.
uff
Service No.
Unit Status
Countermeasures
i
Te Reload the discs properly.
{insert only one disc in a slot.)
Ut
The disc may not be loaded properly in the rack.
@
Check if there is a foreign object attached onto
the disc.
i
@
Check if there is a foreign object in the rack.
U2
There is an operation error in the mechanical section.
| ®
Check if there is @ foreign object in the rack.
i
@
Unplug the power cord then plug it in again.
e@
Replace the disc properly.
i
U3
There is an operation error in the CD SLOT section.
(Insert only one disc in the CD SLOT.)
®
Unplug the power cord then plug it in again.
lf the same display appears again, there may be an error in the mechanical section. When requesting servicing, please also let us know the
|
service number displayed on the unit.
15
<PRB1238>
En
SMOIN
Advertisement
