Advertisement
VARIOUS OPERATIONS
@
The remote control is the most convenient way to perform these
operations.
@
The parenthesis (_ } show operations for the main unit.
Laat
MODE
To program and play only the discs
you want to hear (CUSTOM playback)
This unit lets you program up to 50 of your favorite discs. For exampie,
you can store ail the discs of your favorite artist, or some other group
of personal selections, and play only those discs
You can even add other discs to the custom later on
Operation example:
Storing discs 3 and 12in the CUSTOM file.
During stop mode, press
MODE a few times to se-
lect CUSTOM.
CI
Nee
ove
—
( MODE
3
C
~—
cs
c3
£3
cs co
Use the digit buttons to
select disc.
\
oe
y
3
e
if you use DISC {-, +} to select a disc, it will be programmed
automatically after approximately 2 seconds
Press DISC SET.
Repeat
steps 2 and 3 to
store other discs.
—ser
Io -- 280
oIsc
ane
10
<PRB1238>
En
DISC (~, +)
DISC SET
Vv MODE
»
PressMODE toselect CUS-
[
] -_ Cc) TOM and press >.
'
Ne
q \
Playback starts from the lowest
~ * disc No
\
MODE
(O-7L.])
Checking the numbers of the stored discs.
Press TIME during stop made so that the display changes
as shown below
Press DISC +. Each time you press DISC +, a disc number
stored in the CUSTOM file is displayed. When all the disc
numbers have been displayed, the disc number changes to
a blank.
V
Erasing all the discs from the CUSTOM file.
Press MODE to choose CUSTOM, then press the CLEAR
button on the front pane!
Note!!
You cannot change the discs stored in the CUSTOM file. Likewise,
you cannot erase just one disc from the CUSTOM file.
e
Pressing DISC {-, +} during CUSTOM
playback lets you choose
among other discs stored in the CUSTOM file.
@
if you use the digit buttons and DISC SET on the remote control
during CUSTOM
playback to choose a disc not stored in the
CUSTOM
file, "**- no dISC" will be displayed for approximately
3 seconds.
e@ The discs stored in the CUSTOM file will not be erased when you
turn off the power.
e
When a disc appointed to the CUSTOM
file is not loaded in the
rack, "**- no dISC" is displayed for approximately 3 seconds, the
disc is erased from memory, and CUSTOM searches for the next
disc.
@
'tems stored in memory are saved for approximately 2 days, even
if the power cord is unplugged.
However, this period may be
shortened somewhat, depending on the amount of memory used.
(Memory Back-Up Function}.
Advertisement
