When Loading - Stryker Power-LOAD Troubleshooting Manual

Cot gets stuck

when loading

Scenario
Trolley and cot get stuck
halfway out when loading.
1. Check for debris in the
transfer trolley lock.
Transfer lock
triggers
2. Remove the debris so
the roller will spring
up. If there is no debris,
see step 4.
Trolley assembly
Transfer assembly
3. Pull the cot and trolley all
the way out of the vehicle
to reset. Load the cot into
the vehicle. The trolley
will then lock into place.
4. If there is no debris in the
transfer trolley lock, pull
the patient left transfer
lock trigger. Load the cot
into the vehicle.