Advertisement
Safety precautions
To avoid the possibility of causing injury to users, endangering the life or damage to properties,
please follow all the instructions written below.
The following symbols differentiate the levels of danger and injury that may result if the product
is improperly used.
WARNING
CAUTION
The following symbols indicate type of instructions to be observed.
(The symbols given below are examples.)
Never try to take apart, repair or
modify this product.
Improper use usually cause
electric shock, fire or injury.
Contact the service center or
distributor for repairing this product.
Always use with the supplied AC adaptor,
do not exchange to other AC adaptor in
order to avoid damage to the product.
May occur and cause fire or
electric shock.
If you need to replace AC adaptor, please
contact the service center or distributor.
Please do not turn on the product
unless blade, front guard and rear
guard are installed properly.
It may cause injury.
Do not adjust the height when the
front and rear guards have not yet
been assembled and positioned,
because the motor part will suddenly
rise and cause danger.
The motor part or the slide
pipe may fly out and cause
injury.
This symbol indicates "may cause a risk of death or serious
injury".
This symbol indicates "may cause a risk of injury or damage to
properties".
This symbol denotes an action that is PROHIBITED.
This symbol denotes a COMPULSORY action.
WARNING
Do not cut or modify the power cord or
plug. Do not damage, process, put near
heating appliances, forcefully bend,
twist, pull, put anything heavy on, or
bundle the power cord.
Make sure the power plug of AC adaptor
is fully inserted into the socket.
Do not use the plug or loosen socket.
Do not exceed the rated current of
the power socket and wiring
equipment when using it.
Do not immerse the product in water,
or put water on it.
Please always follow
these Instructions
If it is still used after being
damaged, it will often cause
electric shock, electric
leakage or fire.
May cause fire or electric shock due
to overheat.
Do not use a multi-connector
patch panel or extension cord to
avoid electric shock, heat
generation or fire by exceeding
the rated current.
It may cause fire or electric shock
due to short circuit.
2
Advertisement
