Software License; Connection Status; Steering Wheel Control; Reset - Alpine iLX-W670 Owner's Manual

Software License

[Software License] Displaying the open source software license.

Connection Status

GPS Antenna
• Display when there is an antenna [OK]
• Display without antenna [NOK]
Antenna: Yes Signal:0
Antenna: Yes Signal:1
Antenna: Yes Signal:2
Antenna: Yes Signal:3
Antenna: No
Positioning Status
• Display [position]: When there is positioning
• Display [Not Available]: When there is no positioning
• Display [Not Connected]: When the serial port of the GPS module
is not available
Installation
• Install and learn to successfully display [OK],
• No learning success display [NOK]
Speed Pulse
• Display pulse number "XXX" in unit time, and display "0" if not
obtained.

Steering Wheel Control

Some Vehicles may require a 3rd party module to achieve steering wheel
control functions (Sold Separately)
Setting item:
Steering Wheel Control key learning
Setting contents:
Vol. Up/ Vol. Dn, ON HOOK,
Seek Up, Seek Dn,
Voice Recognition, Source (Mode)
1
Please press and hold key for 2s at the same time don't
press SWC key within 2s
2
Follow the on-screen prompts to complete the operation
3
Key Learning Success:
When operation finished ,If you want to continue other key
learning , please repeat the operation
• Please perform key learning while parked with e-brake active.
• Keys only support learning 1 time. If you need to change the key please
clear all learned keys.
• Touch the clear key to clear all the learned function.
• No time limit for key learning.

Reset

[Reset] is selected on the System Setup Menu screen. You can initialize
all data, to restore the factory settings.
Setting item:
Reset
1
Touch [Reset].
2
After the confirmation message appears, touch [Yes].
The system starts initialization.
• Do not turn on/off the power, change the ignition key position or until
system restart is completed.
OFF HOOK,
MUTE, Play/pause,
31
-EN