Checking The Sirius Xm Radio Id Number; Storing Channel Presets; Tuning Channels Using Presets; Siriusxm List - Alpine iLX-W670 Owner's Manual

Checking the Sirius XM Radio ID Number

To subscribe to the SiriusXM Satellite Radio service, it is necessary to
locate and identify the Radio ID of your SiriusXM Tuner. You can check
the Radio ID on the bottom surface of the SiriusXM Tuner box. You can
also check it from this unit by performing the following procedure.
1
While receiving SiriusXM Radio, touch [
select channel "0".
The unit displays the Radio ID number.
2
To cancel the Radio ID number display, change the
channel to a channel other than "0".
• The SiriusXM Radio ID does not contain the letters I, O, S, or F.

Storing Channel Presets

You can store 18 of your favorite SiriusXM channels for easy recall with
Preset buttons.
1
Long press the Preset number you can store the channel.
A maximum of 6 channels can be displayed on a page.
2
Repeat the procedure to store up to 17 other channels.
A total of 18 channels can be stored in the preset memory.
• If you store a new channel into a preset which already has a channel
assigned, the current channel will be cleared and replaced with the new
one.

Tuning Channels Using Presets

Touch any one of the Preset numbers you have already
stored in the Preset mode screen.
The preset channel is received.

SiriusXM List

1
Touch [ ] .
The list screen appears.
List item:All Channels / Category Name*/Tune
* The Category name for the channel currently being received is displayed.
• You can switch the category by touching [
after selecting a Search item.
List by ALL Channel
2
3
] or [ ] to Searching by Category
2
3

Selecting The Channel Directly

1
2
3

Parental Lock Function

The Parental Control feature allows you to limit access to any SiriusXM
channels, including those with mature content. When enabled, the
Parental Control feature requires you to enter a passcode to tune to
the locked channels. For information on setting the Parental Control
passcode, see "Parental Control" (page 29).
When a locked channel is selected, "Channel [xxx] Locked" is displayed
and then the numeric keypad appears for you to enter the passcode.
Input the 4-digit passcode you set in "Parental Control" (page
29).
The initial number is 0000.
• If you input a wrong passcode, "Incorrect Pass Code entered" is
• After entering the correct passcode, you can access all locked channels
] or [ ] on the List screen
Touch [ ].
All Channels will be displayed in a list.
Touch the selected channel.
The channel you selected is received.
Touch Category Name.
The channels within the category of the current channel are
listed.
Touch the selected channel.
The channel you selected is received.
Touch [ ]or[ ].
The numeric keypad input screen is displayed.
Touch to input the channel number.
Touch [OK].
The selected channel is received.
displayed.
without entering the passcode again until the unit is powered off and
then back on.
19
-EN