Bluetooth Support - prime3 APS32 Owner's Manual

APS32
Battery charging
This unit had built-in rechargeable lithium battery inside. Before start the playing, please follow up below step
for charging.
1. Using the supplied USB cable to connect the speaker with your USB charger (USB adaptor or USB output
port like on PC, USB rating output: DC5V, max 2A, another USB charger with current between 1-2A). The
connector should be connected with the DC 5V power jack on the top panel of speaker, and another
terminal connects with the USB charger. Then plug your USB charger into the household AC power.
2. The charging LED will light on in red color during charging, and the red color LED will off when the battery is
fully charged.
3. The speaker will off automatically when the battery power exhausted please recharge to use the device.
Important: We recommend connecting the USB charger with rating output spec at DC 5V/1A, or between 1-
2A current USB power. The general USB output on PC (personal computer) is 5V/500mA (please reference your
PC spec for checking). There may have some charging noise or abnormal function from speaker if the charging
current is too low. If it happened, please remove the charging power and put the speaker in a while, then the
speaker will reset the function is normal. Please kindly note this is not a malfunction.
Notes:
Your battery life will last longer if you follow up below simple guidelines for charging and storing.
a. For charging the rst time, charge it at least 10 hours.
b. Recharge and store the unit within the temperature range of 5°C~35°C (40°F~95°F).
c. Do not charge longer than 24 hours. Excessive charging or discharging may shorten the battery's life.
d. Battery life naturally shortens slowly over time.
e. Please turn off the speaker if long time not to use it.
f. The speaker can play music during charging.
g. Due to prolong charging and discharging, the unit battery life will be affected and playback time will also
be shortened. We cannot guarantee the same playback consistently throughout and this is not included in
our warranty and service.

Bluetooth support

The speaker has a Bluetooth function, which allows wireless audio playback from other
Bluetooth enabled devices such as smartphones and tablets.
1. Switch the device on by sliding the switch on the side panel. The "BT" icon in the upper left corner of the
upper left corner of the display will ash rapidly, indicating the device is ready for pairing.
2. Activate the Bluetooth function on your device and search for available devices to pair with (follow the
Follow the instructions for your device.
3. Check the devices available for pairing in the list on your device and select" P3_BANG! connect. Enter "0000"
(4 zeros) if the device asks for a code. The BT "Blue "icon on icon on the device display will light up steadily if
the devices are paired correctly. 4.
4. Select and start playing music on your Bluetooth device. The sound will be played through the sound
through the speaker.
5. During Bluetooth playback, use the external device or the buttons on the speaker to adjust the volume,
select the le being played or to pause or resume playback.
6. Press the "Previous track" button to skip to the previous track.
7. Press the "Next track" button to skip to the next track.
5