Advertisement
4. MENU & SETTINGS INTERFACE
4.1 Video Mode Settings
Overview
Your camcorder comes preset with some user-adjustable settings to fine tune and
customize how you would like your videos to be captured. The settings are already
optimized and preset for the easiest experience.
While recording, press the MODE button to lock the file, and prevent it from being deleted
in PLAYBACK mode. Press the MODE button again while recording to unlock the file.
NOTE: The settings menu cannot be accessed while the camcorder is recording a video
file. If the camcorder is recording a file, you must stop recording before the settings menu
can be accessed. To stop recording at any time, press the OK button.
4.1.1 Video Resolution
Your camcorder has a number of preset resolution and frames per second rates. A higher
resolution will produce a higher quality and lager video file.
1. In VIDEO mode, press and hold the MODE button.
2. Select 'Video Resolution' by using the LEFT or RIGHT buttons. Press the OK/RECORD
button to enter the 'Video Resolution' submenu.
3. Press the LEFT or RIGHT buttons to navigate the submenu and select a setting. You
can select from 1080P (highest quality), 720P (higher quality) and VGA (lowest quality).
4. Press the OK/RECORD button to confirm your selected setting.
5. Press the MODE button to exit the submenu without making a selection.
4.1.2 Loop Recording
This setting allows you to set a maximum duration for each video clip recorded. Once you
select an option, your camcorder will record video clips in this time interval only. Once your
selected duration recording time is reached, the camcorder will end the recording and
begin recording a new video file seamlessly.
1. In VIDEO mode, press and hold the MODE button.
2. Select 'Loop Recording' by using the LEFT or RIGHT buttons. Press the OK/RECORD
button to enter the 'Loop Recording' submenu.
3. Press the LEFT or RIGHT buttons to navigate the submenu and select a setting. You
can select from Off, 1 Minute, 3 Minutes and 5 Minutes.
4. Press the OK/RECORD button to confirm your selected setting.
5. Press the MODE button to exit the submenu without making a selection.
11
Advertisement
