Advertisement
1. About Your Camcorder
1.2 Button Function Description
Function
Power | IR
Mode
Menu
Zoom
Record | OK
Photo
UP
Down
Infrared LEDs
Tripod Mount
Description
Tap once to power on, press and hold for 2
seconds to power off. While powered on, tap once
to enable or disable IR night vision.
Tap to cycle between Video, Photo, Playback and
Setup modes.
Tap to access and exit all menus and submenus.
In Video or Photo: Press right to zoom-in. Press
left to zoom-out.
In Playback: While viewing a photo, slide to the
right to zoom in on the photo, slide to the left to
zoom out.
In Video Playback: While playing a video, press
to increase or decrease the volume.
In Video: Tap to start/stop recording video.
In Playback: Tap to play a recorded video, tap
again to stop the video.
OK button in menus. Tap to confirm a setting
In Photo: Tap to capture a photo.
In Playback: While playing a recorded video, tap
to pause and tap again to resume
In Photo and Video: Tap to increase the
exposure value.
In Playback: Tap to scroll through captured
media.
Tap to scroll through menus and submenus.
In Photo and Video: Tap to increase the
exposure value.
In Playback: Tap to scroll through captured
media.
Tap to scroll through menus and submenus.
Infrared LED to aid with vision and recording in
darkness.
Mount port for attaching to a tripod nut.
5
Advertisement
