Table of Contents
Advertisement
Adjusting the Projection Angle
Prior to Adjustment
•
After reading the owner's manual for the projector, turn the projector on, and project an image.
•
Check the INSTALLATION item in the SETUP menu, and set the installation status. If projecting from
the front of the unit, select "FRONT/CEILING;" if projecting from the rear of the unit, select "REAR/
CEILING."
•
Select a projection size using the zoom feature, and then adjust the angle.
1
Adjust the horizontal angle.
Adjust the projector so that the projected image is centered horizontally on the screen, and then tighten the
horizontal angle adjustment screws.
Left
Maximum angle of
adjustment: ±10˚
14
E-
Right
10˚
10˚
(PMT-L11)
Horizontal angle adjustment screws
(PMT-H15)
Advertisement
Table of Contents
