Table of Contents
Advertisement
5
Install the safety brackets.
Align the safety brackets so that the mounting guide pin fits into the hole, and then use the four safety
bracket mounting screws (M4, pan head) to secure the brackets. (Use two screws on the left side and two
screws on the right.)
6
Temporarily secure the projector mounting adapter.
Use the four vertical angle adjustment screws (M6, hexagonal head) provided to temporarily secure the
projector mounting adapter. (Use two screws on the left side and two screws on the right.)
Vertical angle adjustment screw
(Hand-tighten the other side also.)
(PMT-L11)
Safety bracket mounting screw
(M4, pan head)
Safety bracket
(PMT-L11)
13
E-
Advertisement
Table of Contents
