De Raat Insys Combilock 200 Simplex Quick Start Manual

Advertisement

Insys Combilock 200
Simplex

Opening and closing

1. Enter the six-digit code. At the correct input, a signal is
confirmed and the green LED flashes.
2. After the code has been entered, the lock must be
opened within 10 seconds by turning the panel clockwise
or the lock will automatically lock.
Locked position
If incorrect code is entered four times in a row,
a 10 second blocking period starts.
3. Now the bolt work can be turned up and the door can
be opened.
Unlocked position

When locking the safe

To lock the safe, close the door properly and turn back the
bolt work.
Then turn the panel counterclockwise to the locked
position.
Unlocked position
Before leaving the cabinet it is important to turn
the panel and the bolt work to ensure that the
lock is locked correctly.
Locked position

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Insys Combilock 200 Simplex and is the answer not in the manual?

Questions and answers

Summary of Contents for De Raat Insys Combilock 200 Simplex

  • Page 1 Insys Combilock 200 Simplex Opening and closing When locking the safe 1. Enter the six-digit code. At the correct input, a signal is confirmed and the green LED flashes. To lock the safe, close the door properly and turn back the bolt work.
  • Page 2 Change the master code Delivery code: 123456 Attention! The cabinet must be open for code changes. 654321 used as example for the new master code. Start programming below within 10 seconds after the lock in unlocked. The keypad does not need to be turned to unlocked while programming. Enter the current master code Enter the new master code Repeat the new master code...

Table of Contents