Yamaha PLG100-VH Owner's Manual page 6

The Chordal type produces up to three harmony notes according to the chords you play
on a connected MIDI keyboard (or chords recorded to a sequencer).
z Click on the Effect tab.
x Set the
Harmony Type
c Set
Part to "Ad1."
• If you are using a Modular Synthesis Plug-in-compatible tone generator or synthesizer, you'll
need to set the Part Number from the device itself.
v Click on the System tab.
b Set the
Harmony Channel
connected MIDI keyboard or sequencer.
n Make sure that
mony Volume settings are set to appropriate levels (90 or greater).
• When you play the keyboard and sing into the microphone, the harmonies correspond to the
chord you play.
• If you continue to hold your vocal note, the harmony notes will also continue to sound, even
after you release the keys.
• You can create automatic chordal harmonies for an entire song (on sequencer) by recording
the appropriate chords to one track of the song. The chords can also be specified and input
from the Chord
• The chord data for controlling the harmonies can be recorded as system exclusive data —
eliminating the need for a keyboard or for dedicating a MIDI channel for harmony data.
• The Mode parameter gives you access to a variety of harmony styles (Duet, Trio, and Quartet)
and various voicings (above and below the original vocal note).
Harmony Types /
Applying Chordal Harmony
to Chordal.
to match the MIDI transmit channel of the
Harmony Mute is set to "off" and that all three
tab.
Applying Chordal Harmony
6
Har-