Advertisement
XR-Q150
11. OPERATIING DESCRIPTION
@ AUTO POWER ON
TAPE
* Mode switch (IC401 21 pin) is detected, and when this switch is "L" (PLAY), the deck mechanism is initialized.
« Set the function to TAPE.
AUX/CD II
¢ Set the function to AUX.
+ Set the SR OUT output (IC401 40pin) to "H" to correspond to the extension CD.
TUNER
+ Putout a dummy frequency data (1C401 34, 35, 36 pin) to the tuner module, and then the last memory frequency
is output.
« Set the function to TUNER.
CD
+ Set the function to CD.
+ Execute the CD setup operation.
@ OTHERS
+ When the power code is plugged into an outlet, the "DEMO" display mode will be set automatically.
[DEMO Release Method]
Press the F-MODE (DEMO) during the DEMO operation, or turn the power ON.
[DEMO Re-operattion Method]
Press the FF MODE (DEMO) during the standby mode.
65
Advertisement
