Table of Contents
Advertisement
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
Do not use a battery pack or tool that is
•
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or
•
excessive temperature. Exposure to fire or
temperature above 130°C (265°F) may cause
explosion.
•
Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature
range
instructions.
Charging
temperatures outside the specified range may
damage the battery and increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
SPECIFIC SAFETY RULES FOR
IMPACT WRENCHES
• Hold the power tool by insulated gripping
surfaces, when performing an operation where
the fasterner may contact hidden wiring.
Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
Wear ear protectors when impact drilling.
•
Exposure to noise can cause hearing loss.
If using with a lanyard, do not exceed maximum
•
capacity marked on the lanyard label. Always
determine the weight of the product, with all
accessories, when selecting the appropriate
lanyard system. Exceeding maximum capacity
may result in serious injury. See specifications for
tool and battery weight.
•
Use only with energy absorbing lanyards.
Ropes, straps or chains may break and cause
failure. Do not use with lanyards at full tension.
•
Use only sockets and other accessories
specifically designed for use on impact
wrenches and drivers. Other sockets and
accessories might shatter or break causing injury.
To reduce the risk of injury, when
WARNING
working
wear appropriate respiratory protection or use
a suitable dust extraction solution.
Always use common sense and be cautious
•
when using tools. It is not possible to anticipate
every situation that could result in a dangerous
outcome. Do not use this tool if you do not
understand these operating instructions or you feel
the work is beyond your capability; contact
specified
in
improperly
or
in
dusty
situations,
MILWAUKEE
®
additional information or training.
•
Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE
replacement.
WARNING
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
the
READ AND SAVE ALL INSTRUCTIONS FOR
at
ADDITIONAL BATTERY SAFETY RULES
WARNING
a short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow inside
them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a
short circuit.
WARNING
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Impacts per Minute Under Load (IPM)
Read operator's manual
Regulatory Compliance Mark (RCM).
This
regulatory requirements.
Do not dispose of electric tools
together
material. Electric tools and electronic
equipment that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
3
Tool or a trained professional for
service facility for a
®
Some dust created by power sanding,
sawing, grinding,
drilling, and other
FUTURE USE
T
o reduce
the risk of fire, personal
injury
, and product damage
Do not charge non-rechargeable
batteries.
SYMBOLOGY
product
meets
with
household
due to
applicable
waste
Advertisement
Table of Contents
