Page 1
OPERATOR'S MANUAL Cat. No. M18 FHIW2P12 M18 FHIW2F12 M18 FUEL GEN 3 HIGH TORQUE IMPACT WRENCH W/ 1/2" PIN DETENT M18 FUEL GEN 3 HIGH TORQUE IMPACT WRENCH W/ 1/2" FRICTION RING WARNING To reduce the risk of injury, user must read and understand operator's manual.
GENERAL POWER TOOL • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury.
Page 3
Maintain labels and nameplates. These carry keys, nails, screws or other small metal objects, important information. If unreadable or missing, that can make a connection from one terminal contact a MILWAUKEE service facility for a to another. Shorting the battery terminals together ®...
WARNING the tool. 2. Use only the appropriate size Square Drive Sockets. 1. Tool hanger ring (M18 FHIW2P12 only) 3. To attach a socket, align the accessory with the 2. Handle anvil and push it firmly over the retaining ring.
Starting, Stopping and Controlling Speed Cat. No. M18 FHIW2P12 1. To start the tool, grasp the handle(s) firmly and Fastening Nut-Busting pull the trigger. Torque Torque Mode (Nm) (Nm) NOTE: A LED is turned on when the trigger is pulled and will go off shortly after the trigger is...
Page 6
Repairs For repairs, return the tool, battery pack and charger to the nearest authorised service centre. ACCESSORIES only recommended WARNING accessories. Others hazardous. For a complete listing of accessories, go online to milwaukeetool.com.au / milwaukeetool.co.nz or contact an authorised distributor.
Page 8
Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...