Table of Contents
Advertisement
4 Shipment and on-site trans-
port
The work described in this section is only to
be performed by personnel appropriately
qualified to carry out such tasks.
4.1 Accepting the delivered
goods
After receiving the shipment, proceed as fol-
lows:
1. Check the scope of delivery. Check that
the specifications on the nameplate of
the reversing amplifier match the specifi-
cations in the delivery note. See the
'Markings on the device' section for
nameplate details.
2. Check the shipment for transportation
damage. Report any damage to SAM-
SON and the forwarding agent (refer to
delivery note).
4.2 Removing the packaging
from the reversing
amplifier
Observe the following sequence:
Î Do not remove the packaging until im-
mediately before installation.
Î Dispose and recycle the packaging in
accordance with the local regulations.
EB 8392 EN
Shipment and on-site transport
4.3 Transporting the reversing
amplifier
Î Pack the reversing amplifier properly to
comply with terms of transportation.
Observe the following transport instructions:
− Protect the reversing amplifier against
external influences (e.g. impact).
− Protect the reversing amplifier against
moisture and dirt.
− Observe transport temperature depend-
ing on the permissible ambient tempera-
ture (see the 'Design and principle of op-
eration' section).
4.4 Storing the reversing
amplifier
NOTICE
!
Risk of damage to the reversing amplifier
due to improper storage.
Î Observe the storage instructions.
Î Avoid long storage times.
Î Contact SAMSON in case of different
storage conditions.
Note
We recommend regularly checking the pre-
vailing storage conditions during long stor-
age periods.
Observe the following storage instructions:
4-1
Advertisement
Table of Contents
