Yamaha MOTIF RACK ES Supplementary Manual page 32

"Transmit Dialog"
Voice data can be transmitted in bulk to your synthesizer. Select the bulk voice data you wish to
receive, then click [Start]. The progress bar shows how much of the data has been transmitted.
Finally, click the [Close] button to quit the dialog.
n
When transmitting user voice data to the MOTIF-RACK ES, user voice data in the MOTIF-RACK ES
will be overwritten. Exercise caution so as not to accidentally overwrite a User voice that you have
used in another Multi configuration.
n
When the User Voice of any given part is already selected, transmit the Multi settings to the MOTIF-
RACK ES after you bulk transmit the User Voice data. By transmitting the Multi settings you can play
the MOTIF-RACK ES the newly transmitted voice data.
n
Transmission time can be set under "Dump Interval" on the "Setup dialog"
1 Transmit Type .................. Click this and select which user voice data to transmit to the MOTIF-
Normal User 1+2+3+Drum ..... All Normal User 1-3 voices and Drum voices
Normal User 1 ........................ All Normal User 1 voices
Normal User 2 ........................ All Normal User 2 voices
Normal User 3 ........................ All Normal User 3 voices
Normal User 1+2+3 ................ All Normal User 1-3 voices
Drum User .............................. All Drum User voices
n
Voice data for optional plug-in boards can not be transmitted.
2 Progress Bar ................... Indicates how much of the data has been transmitted.
3 Start ................................ Click this to begin the transmission. Once transmission has started,
4 Close............................... Click this to close this dialog.
n
The MIDI Device Number has to be set correctly in order to transmit bulk data. For further details, see
page 31.
RACK ES.
this button changes to a [Stop] button. Clicking [Stop] will stop the
transmission.
32
(page 31).
1
2
3
4