Do you have a question about the SmartVac 12 and is the answer not in the manual?
Questions and answers
alexander pazda
March 10, 2025
how to unclog the base
1 comments:
Mr. Anderson
March 10, 2025
The manual does not provide specific instructions for unclogging the base of the HOMPANY SmartVac 12. However, general troubleshooting steps for cleaning performance issues include:
1. Empty the dust bin. 2. Check if the dust bin is correctly assembled. 3. Ensure the filter is correctly fitted. 4. Clean the filter.
If the base is clogged, removing and cleaning the dust bin, filter, and any blocked areas in the power brush may help.
This answer is automatically generated
Paul Aupperlee
February 6, 2025
Cup full lite up but cup seems empty
1 comments:
Mr. Anderson
February 10, 2025
The cup full light on the HOMPANY SmartVac 12 may be on even when the cup appears empty due to a blockage or sensor issue. Check if the dust cup and filters are clean and properly installed. Also, inspect for any debris blocking the airflow sensor.
If you have any questions, please email to support@hompany.top If you have any questions, please email to support@hompany.top IMPORTANT SAFETY INSTRUCTIONS IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE. RETAIN INSTRUCTIONS FOR FUTURE REFERENCE. Do not use in rain or leave outdoors while raining WARNING: Basic safety precautions should always be observed when using an electrical appliance, including the following to reduce the risk of fire, electrical shock, or injury.
If you have any questions, please email to support@hompany.top PRODUCT INSTRUCTIONS Product parts introduction Speed button Battery pack Battery pack release button On/Off switch button Dust cup Display screen Dump dust button Metal tube release button Telescopic metal tube Telescopic metal tube...
Page 4
If you have any questions, please email to support@hompany.top Power indicator Floor brush Full cup indicator stall indicator Gear indicator...
If you have any questions, please email to support@hompany.top Product Installation: I. Use as stick vacuum cleaner 1. Insert the metal tube into the body until you hear a “click”. Insert the motorized brush to the head of the metal tube until you hear a “click”.
Page 6
If you have any questions, please email to support@hompany.top II. Use as handy vacuum Insert the accessory to body until you hear a click. III. Battery charging: 1) When the power indicator flashes for seconds and turns off, indicating that the power has been used up.
Page 7
If you have any questions, please email to support@hompany.top (4) Remove the battery pack Press and hold the battery pack release button and pull it out backward to remove the battery pack. Battery pack release button (5)The battery pack is charged separately...
Page 8
If you have any questions, please email to support@hompany.top IV.Product storage Fix the wall mount to the wall with nails; Lock the floor brush and fix the machine to the wall mount; Attach cleaning accessories to wall mount. Floor brush lock...
Page 9
If you have any questions, please email to support@hompany.top DEMOLITION INSTRUCTIONS V.How to empty the dust cup 2)Move the dust cup in below direction 1)Press the dust cup lock. to take off the dust cup. 3)Take out filter and filter cover as below.
Page 10
If you have any questions, please email to support@hompany.top 5)Be sure to dry the filter and filter cover 4)Wash filter and filter cover. completely. 6)Put the filter case back into the dust cup. 7)Attach the dust cup by twisting in...
Page 11
If you have any questions, please email to support@hompany.top VI.Removal method of roller brush: 1) Disconnect the power supply and slide the 2) Slide the brush latch to the brush lock to the right as shown in the figure unlocked state...
If you have any questions, please email to support@hompany.top TROUBLESHOOTING & TECHNICAL SPECIFICATION TROUBLESHOOTING 1.Empty the dust bin 2.Checked dust bin is correctly assembled Not cleaning well 3.Check the filter is correctly fitted 4.Clean the filter 1.Charge battery Stop or doesn’t work 2.Clean the filter...
Page 13
Contact us- We will get back to you within 1 business day. support@hompany.top ROHS MADE IN CHINA...
Need help?
Do you have a question about the SmartVac 12 and is the answer not in the manual?
Questions and answers
how to unclog the base
The manual does not provide specific instructions for unclogging the base of the HOMPANY SmartVac 12. However, general troubleshooting steps for cleaning performance issues include:
1. Empty the dust bin.
2. Check if the dust bin is correctly assembled.
3. Ensure the filter is correctly fitted.
4. Clean the filter.
If the base is clogged, removing and cleaning the dust bin, filter, and any blocked areas in the power brush may help.
This answer is automatically generated
Cup full lite up but cup seems empty
The cup full light on the HOMPANY SmartVac 12 may be on even when the cup appears empty due to a blockage or sensor issue. Check if the dust cup and filters are clean and properly installed. Also, inspect for any debris blocking the airflow sensor.
This answer is automatically generated