Advertisement
Quick Links
Street Wrap
Installation Guide
Cutting and Sealing
End
Silicone
cap
glue
Installation tools
2. Clean cut end before next steps.
Flex Mini
™
Pipe
cutter
1. Cut on designated cut mark.
3. Coat end cap with silicone glue
and install.
CAUTION
Do NOT twist and
STOP
bend this product
abruptly or severely.
This action may
cause copper trace or solder
connections to crack, resulting in
section outages along the strand.
TAKE EXTREME CAUTION WHEN
UNBOXING AND INSTALLING.
Normal flex
Unnatural bend
Section outage
Result of twist & bend
Outages caused by these actions
may void your warranty.
Unwind Flex strip from coil or reel
carefully and without twisting.
PAGE 1 OF 2
Advertisement
Related Manuals for Principal LED SloanLED Street Wrap Flex Mini
Summary of Contents for Principal LED SloanLED Street Wrap Flex Mini
- Page 1 Street Wrap Flex Mini ™ Installation Guide Cutting and Sealing CAUTION Do NOT twist and STOP bend this product abruptly or severely. This action may Silicone Pipe glue cutter cause copper trace or solder connections to crack, resulting in section outages along the strand. 1.
- Page 2 Street Wrap Flex Mini ™ Installation Guide Installation Street Wrap Flex Mini can be mounted to any surface that will accommodate conventional fasteners. Mounting clips 1. Place mounting clips wherever 2. Gently press product into Mounting Accessories necessary to shape Street Wrap Flex mounted clips.
Need help?
Do you have a question about the SloanLED Street Wrap Flex Mini and is the answer not in the manual?
Questions and answers