Product Modification; General Notes; Safety Instructions - CASARIA 109667 Manual

INSTRUCTIONS
Dear Customer,
Thank you for choosing our product. You have made an excellent choice in purchasing one of our
branded products. Our products are regularly inspected to ensure that they meet the desired high
quality standard and, of course, always comply with the stringent requirements of the European
Union.
READ THE USER INSTRUCTIONS. IMPORTANT INFORMATION INCLUDED. KEEP FOR
FUTURE USE!
Please read the instructions thoroughly and in their entirety before using the product for the first
time. Keep these instructions for future reference. Should you pass the product on in future, ensure
that you also include these instructions.
CAUTION! POTENTIAL DANGER!
Observe the safety information and setup instructions to avoid the risk of injury or damage to the
product.
RISK OF SUFFOCATION!
Keep small parts and packaging material out of the reach of children!

PRODUCT MODIFICATION

Never make modifications to the product! Modifications will invalidate the warranty and the
product may become unsafe or, in the worst case scenario, dangerous.

GENERAL NOTES

• Please note that screws should first be inserted by hand and tightened only slightly, so that the
screws find purchase and loosely connect the constituent parts.
• Do not tighten the screws until all elements are connected in the correct way. Subsequent
tightening of the screws can compensate for minor discrepancies in the drill holes that can be
present in hand-finished products.
• Ensure that this product is fully assembled before use. Check that all screws are securely
tightened and do this on a regular basis.
• Do not overtighten the screws, excessively tightened screws can damage the material and lead
to cracking. Keep small children away during assembly as there is a risk of injury!
• Failure to carry out regular care and maintenance will significantly reduce the life of your
product. We cannot accept any liability for consequential damage resulting from lack of care
and maintenance.

SAFETY INSTRUCTIONS

• Attention! The product must not be placed without adequate fastening to the wall.
• When mounting, check the selected attachment point for hidden supply lines (water, electricity,
gas) before drilling.
• Wear suitable protective equipment (safety goggles, ear defenders, clothing) during
installation.
EN
4 www.DEUBAXXL.de