Table of Contents
Advertisement
Starting Work
Set the rotation direction
with the forward/reverse
lever.
When you set it to the "F" position
and the "R" position, the motor
rotates forward (clockwise) and
reverses (anticlockwise) respectively.
Forward (Clockwise)
Reverse (Anticlockwise)
NOTE
If the forward/reverse lever is
switched while the motor is
in action, the motor is forcibly
stopped to rotate.
Start rotation.
In "lever start" mode, pull the lever.
In "push start" mode, push toward
the bit.
Lever start
There may be a slight delay in
the rotation startup at the start,
R position
but it is not a failure.
In case of quick ON/OFF, the
rotation startup will be late a
F position
little for that.
You can select "lever start" or
"push start" for start mode.
Push start
P. 14
17
EN
Advertisement
Chapters
Table of Contents
