Table of Contents
Advertisement
SAFETY PRECAUTIONS
Prohibited
4
EN
Do not use a socket or wiring device in the manner of exceeding
the rated value. Use only within electrical rated range.
Exceeding the rated value due to an overloaded socket may cause heat
generation resulting in fire.
Do not damage the screwdriver cord, power cord, or power
plug. (Avoid damaging, breaking, modifying, putting close to
a heat source, bending with force, twisting, pulling, putting a
heavy load on it, pinching, or binding.)
Using the damaged cord or plug may result in electric shock, short circuit,
or fire.
Check the cord and plug periodically and if any damage, consult your dealer.
When smoke is emitted from the tool, do not inhale the smoke.
It may be harmful to your body.
Immediately after work, do not touch a bit or other pointed
tools, screws, or chips.
They are hot and may cause burns.
Do not use the tool for any other purpose than intended.
Failure to observe this may cause injury.
Do not use the tool with oil or other foreign material attached
to it.
Otherwise an accident may occur if the tool falls.
Also, such oil or other foreign material may enter the inside, resulting in
generation of heat, fire, or burst.
While using a bit or other rotating parts, keep your body or a
part of your body away from the rotating parts or chips.
You may be injured when an unexpectedly detached or damaged bit or
chips hit you. Replace a bit or other pointed tools periodically.
Do not use the screwdriver cord, power adapter, or power
cord designed specifically for our screwdrivers to operate
other devices.
Failure to observe this may cause an accident or injury.
Do not use the tool in an environment where asbestos exists
nearby (including an environment where asbestos is being
removed).
Doing so may adversely affect health.
Great care should be given to asbestos, because this substance causes
lung cancer or other serious health damage.
Always adhere to the instructions
WARNING
Advertisement
Chapters
Table of Contents
