Advertisement
PD-6010/KC,HEM,HB
12. FOR KC, HEM and HB TYPES
@ Model PD-6010/KC, HEM and HB are the same as the PD-6010/KU with the exception of this supple-
ment.
Contrast of Miscellaneous Parts
Part No.
Symbol & Description
ic
PD-6010(BK)/KU
PD-6010(BK)/KC
PD-6010(BK)/HEM
PD-6010(BK)/HB
Power transformer (120V)
PTT-233
PTT-234
fae
waee
Power transformer (220/240V)
dae %
wee
PTT-235
PTT-235
AC power cord
PDG-046
PDG-046
PDG-037
PDG-062
Strain relief
CM-22
CM-22
CM-22B
CM-22B
AC socket (AC OUTLETS)
PKN-003
Packing case
PHH-273
PHH-273
PHH-274
PHH-274
Operating instructions (English)
PRB-297
PRB-297
aa
PRB-297
Operating instructions
rey
cay
PRE-047
(English/German/French/
Italian)
@ The exterior components of PD-6010(BK)/HEM differ from PD-6010/HEM and PD-6010/HB as
follows;
Part No.
Symbol & Description
Remarks
PD-6010(BK)/HEM
PD-6010/HEM
PD-6010/HB
Front panel (D)
PAN-097
PAN-100
PAN-100
Function panel (D)
PNY-450
PNY-451
PNY-451
Knob cap (A) (PLAY)
PAC-236
PAC-235
PAC-235
Knob cap (A) (PAUSE)
PAC-238
PAC-237
PAC-237
Knob cap (STOP)
PAC-240
PAC-239
PAC-239
Knob cap (A) (TRACK)
PAC-242
PAC-241
PAC-241
Knob cap (B) (TRACK)
PAC-244
PAC-243
PAC-243
Knob cap (A) (MANUAL)
PAC-246
PAC-245
PAC-245
Knob cap (B) (MANUAL)
PAC-248
PAC-247
PAC-247
Knob cap (PROGRAM)
PAC-250
PAC-249
PAC-249
Button (REPEAT)
PAC-270
PAC-269
PAC-269
Button (OPEN/CLOSE)
PAC-252
PAC-251
PAC-251
Button (B) (POWER)
PAC-254
PAC-253
PAC-253
Bonnet
PNA-225
PNA-224
PNA-224
Packing case
PHH-274
PHH-275
PHH-275
PRB-297
Operating instructions (English)
se
ioe
Operating instructions
PRE-047
PRE-047
(English/German/French/
Italian)
Line Voitage Selection for HEM and HB Types
240V:
Connect
the
blue
lead
wire
to
the
TRANS 1 terminal on the primary board
assembly
and connect the violet wire to
the TRANS 2 terminal.
4. Stick the line voltage label on the rear panel.
1. Disconnect the AC power cord.
2. Remove the bonnet case.
3. Change the connection of the power transformer
primary lead wires as follows:
220V:
Connect
the
blue
lead
wire
to
the
ae
TRANS 2 terminal on the primary board
oaubuen | we ane
assembly
and connect
the violet lead
240V label
AAX-192
wire to the TRANS 1 terminal.
86
Advertisement
