Advertisement
assembly
When the disc table is remounted by pressure in-
sertion,
always
make
contact
with
the
stopper
below
the spindle motor, insert a spacer (64mm
hexagonal wrench. etc.) to ensure that the gap be-
Disc table
NOTE:
¢4mm
hexagonal wrench is included hexagonal
wrench set. (No. GGH-003).
Spindle motor
Stopper
Sub-cord
assembly
Mechanism chassis
assembly
Motor assembly
(CARRIAGE)
Disc table
Fig. 5-2 Disassembly
Fig. 5-4 Disassembly
Advertisement
