Advertisement
Appendix B: UTD5000 Series Digital
Storage Oscilloscope Accessories
Standard:
1.2m 10:1 passive probe P9550A
probe manual for details Conform to EN61010-031
Power cable certified for the country of use, 1 pcs.
User Manual, 1 pc.
Warranty Certificate, 1pcs
UTD5000 Series control software (USB-DEVICE)
USB connection wire UT-D06
Optional:
Active probe(P6243 refer to probe manual for details
Please contact UNI-T distributor if you want to
purchase all accessories(standard or optional)
98
Appendix C: Maintenance General Service
Do not store or place the Oscilloscope in places
that may get its LCD exposed to direct sunshine for a
long time.
pcs refer to
Caution: Do not let spray agent, liquid and solvent
stick onto the Oscilloscope or probe so as to avoid
any damage to the Oscilloscope or probe
Cleaning
Check the Oscilloscope and its probe as actual
operation requires. Clean the Oscilloscope surface as
follows:
1. Clean dust on the Oscilloscope and probe surface
with soft cloth. Avoid any scratch to LCD transparent
protective layer.
2. Clean with soft cloth damped with water or mild
agent no water drop is allowed to occur Do not use
any corrosives or abrasives Disconnect the power
supply before cleaning
Warning:
To avoid any short circuit or even personal injury
resulted from residual water, please make sure the
Oscilloscope is totally dry before powering it on
UTD5000 User Ma nual
Advertisement
