Table of Contents
Advertisement
8. Install the stopper plate (7) and tighten the
socket bolt (8) to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
(7)
(7) stopper plate
(8) socket bolt
9. Check that the RC valve and valve shaft
move smoothly.
10. Install the cylinder (page 52).
RC Valve Cable
Rear RC Valve cable
1. Turn the outer lock nut (1) until it seats
against the adjuster (2). Connect the rear RC
(8)
valve cable (3) to the RC valve pulley (4).
2. Turn the RC valve pulley counterclockwise
fully.
Turn the adjuster clockwise until the inner
lock nut (5) seats against the cylinder (6).
3. Tighten the outer lock nut securely.
(4)
(1) outer lock nut
(2) adjuster
(3) rear RC valve cable
0 mm
(2)
(1)
(3)
0 mm
(6)
(5)
(4) RC valve pulley
(5) inner lock nut
(6) cylinder
Front RC Valve cable
1. Turn the RC valve pulley (1) clockwise fully
until the RC valve pulley stops against the pin
(2).
2. Loosen the inner lock nut (3) until it reaches
the end of the cable threads.
3. Connect the front RC valve cable (spring/seat)
(4) to the RC valve pulley.
4. Install the seat (5) to the cable guide (6) while
compressing the spring.
5. Tighten the adjuster (7) until the inner lock
nut seats to the cylinder (8).
6. Tighten the outer lock nut (9) securely.
(9)
0 mm
(8)
(5)
(3)
0 mm
(4)
(1) RC valve pulley
(6) cable guide
(2) pin
(7) adjuster
(3) inner lock nut
(8) cylinder
(4) front RC valve cable
(9) outer lock nut
(5) seat
Servicing Your Honda
RC Valve
(7)
(6)
(2)
(1)
57
Advertisement
Table of Contents
