Advertisement
Quick Links
How to Replace Batteries in a Honeywell Flood Sensor Model
SIXFLOODA
Description
This page shows battery replacement for Honeywell Flood Sensor Model SIXFLOODA
Because there are many different versions of flood sensors, it is important to remove the sensor
cover first to determine what kind of batteries are required for your equipment. We advise you
to check before purchasing batteries.
Preparation
***IMPORTANT customers who use myadt.ca*** Before removing the sensor, place the
panel on test mode through
1. Tap [Home]
2. Tap [Place on Test]
3. Enter your expiration date and time
4. Enter your password
5. Tap [Yes-Proceed]
Parts Required
One CR123A 3-volt lithium battery
myadt.ca. After logging in:
Advertisement
Related Manuals for Honeywell SIXFLOODA
Summary of Contents for Honeywell SIXFLOODA
- Page 1 SIXFLOODA Description This page shows battery replacement for Honeywell Flood Sensor Model SIXFLOODA Because there are many different versions of flood sensors, it is important to remove the sensor cover first to determine what kind of batteries are required for your equipment. We advise you to check before purchasing batteries.
- Page 2 Instructions 1. Use your finger to press the tab on the end of the sensor and gently pull it open 2. Remove the old battery with the use of the flathead screwdriver and wait 2 seconds before putting new battery in 3.