Advertisement
Advertisement
Table of Contents
Related Manuals for LDA one PTTS02
Summary of Contents for LDA one PTTS02
- Page 1 PTTS02 Installation Manual Push-To-Talk Microphone ONE-PTT for ONE systems.
- Page 2 Safety information 1. Read these safety instructions and keep them in a safe place. 2. Download and read the latest version of the device's manual from: www.lda-audiotech.com/en/web-support/ Please, read the user's manual. Important information about installation and use. Caution! Person can be Injured, or equipment can be damaged if safety instructions are not followed.
- Page 3 CONTENTS 1. LDA Dynamic push to talk magnetic microphone. 2. Cable patch to fix in ONE cabinet. Includes a 34mm tap and microphone connector. 3. ESD bracelet to avoid any damage in internal circuits.
- Page 4 CONFIGURATION Before the ONE-PTTS02 installation (see QUICK INSTALLATION GUIDE), user can define its usage case following the related title founded in the user manual. Download the latest ONE 500 v3 User Manual https://lda-audiotech.com/en/web-support/. ONE-PTT S02 needs v03.01.01.XX or above firmware.
- Page 5 QUICK INTSALLATION GUIDE 1. Turn off the device, then, open the top cover by removing the 5 screws. 2. Carefully, open the rear pre-cut die opening by moving it up and down using a screwdriver. 2.1. Screw the connector in the rear opening. It can be placed either on the first or on the second cut- die, close to the control board.
Need help?
Do you have a question about the one PTTS02 and is the answer not in the manual?
Questions and answers