Test Id Data Settings; Data Log Settings Screen - LACO Technologies LHCT03D Operation And Maintenance Manual

6 OPERATING PROCEDURES
26

Test ID Data Settings

Up to 5 user defined Test ID data points can be configured on the Test ID
Configuration screen. Descriptions can be entered on the touchscreen, or the user
can load Default Test ID's by pressing the "Load Defaults" button. Select the "Log"
icon if you want to log the data. Select "Clear" if you want the controller to delete the
Test ID at the end of a completed test.
The require Test ID data option requires a user to enter all blank data fields after they
press the start button on the test screen.

Data Log Settings Screen

LHCT controllers can log process data to the controller and this data can then be
uploaded with a connected USB disk drive (DOK). Users can log data by one of the
following 3 data log methods:
LHCT03D & LHCT03D-R Operations and Maintenance Manual LACO Technologies