Onkyo TX-38410 Instruction Manual page 19

Receiving RDS (TX-8410R Only)
PTY/TP
DISPLAY "DOWN TUNING UP >
SPEAKERS, FM MUTI & TUNED ©
a VIDEC TON UTERES
Los |
1. Press the PTY/TP button, and the program type of
the currently selected station will be shown on the dis-
play (for example, "SPORT"').
= "NOT RDS* (this is not an RDS station) will be shown
AOOWN TUNG UP ; cna Sys emia : on the display.
3 a : Use the TUNING UP/DOWN buttons to select another
program type (PTY) (for example, "ROCK M"').
See the PTY descriptions on the previous page.
3. Press the SCAN button to start searching for the cho-
eee sen PTY station.
When a station is received with the desired PTY. the
scanning stops for approximately 5 seconds. before the
unil Starts scanning again.
4. When the desired station is reached, press SCAN but-
ton again to stop scanning.
JESS sss arene CR iw aca pg ne tne asap
a
~~
"|
|
~
«
se
Q
— a™
r z
Sasa e
s
Tae aa
PTY TF " GPEAKE HL, FMMOTL & TUNED}
WOEO TD On ST7EREG
: display.
If "x * = 1s shown on the display. it indicates that the
current Station is broadcasting traffic information.
Press the SCAN button to start searching for a TP
Station.
When the unit receives a TP station, it stops scanning.
If the unit cannot receive any signal. "NOT FIND" (can-
not find the station) 1s shown on the display.
If the station you are listening to is not an RDS station, this
function cannot be used.
1. Each time you press the DISPLAY button, the display
changes as shown in the left.
If the current station you are listening to is not an RDS sta-
tion, only the frequency of the station or the station name, if
you have entered it (see page 20) appears. (If there have
(> Frequency ; Character or Programme § been no characters entered. only the frequency is shown.)
. When RT is received, it can sometimes take between a few sec-
= onds and 15 seconds (more or less) to show RT on the display.
Radio Text © Sometimes the following messages will be shown on the dis-
play.
WAIT: indicates that it requires more time to receive the RT
information. When the information is received, the charac-
ters will scroll across the display.
NO TEXT: this appears for 3 seconds and indicates that
even though an RDS station is being received, there is no RT
information included.