Remote Control - Onkyo TX-38410 Instruction Manual

Remote control
REREAD PERE GBS Saag a
: 1. POWER 6. SLEEP
: 2. INPUT
SELECTOR
3. DECK-A,
DECK-B
4. TUNER 7. MUTING
5. CD 8. VOLUME :
RIMOTE GenTAS: oncows FRY :
Insert the batteries into the remote contro! according to the iliustration. :
San See
a EE BET By
(9g
SS,
iS
RES SE IB 8 oe Br
Remote control sensor TX-8410/TX-8410R
STAND-BY/RECE!IVED
Indicator
approx. 5 m
(16 feet) LOE NEES I IR
rg
1. Power button [14]
2. Input Selector buttons [14, 21, 22]
3. Tape deck operation buttons [11]
4. Tuner operation buttons [17]
5. CD player operation buttons [11]
6. Sleep button [15]
7. Muting button [15]
8. Volume up/down buttons [14]
Average battery life is about one vear.
depending upon the frequency of use and
the environment (temperature and humid-
ity) in which the remote control is used.
Only use batteries of the kind specified in
the table below.
Warning
e Do not leave an expired battery in the
case — it may leak or damage the remote
control.
@ Do not use nickel cadmium (recharge-
able) batteries.
e Replace both batteries at once: do not
use one old battery and one new battery.
The STAND-BY/RECEIVED _ indicator
lights when a signal is received from the
remote control.
The following information will help you
get optimal use from the remote control.
@ Place this unit away from direct bright
light, which can prevent proper opera-
tion of the remote control.
e@ Make sure audio rack doors do not have
tinted glass. If this unit is placed behind
such a door. this may prevent proper
remote control operation.
e Using other remote controls in the same
room as this unit's remote contro] may
cause interference.