Profelmnet VERO 400 DC Manual

1.1. ΠΛΗΡΟΦΟΡΙΕΣ ΑΣΦΑΛΕΙσαΑΣ

Please read this manual carefully before installation, in which involves with important information
about installation、using、maintenance and safety.

Any undefined operations under this manual is not allowed, incorrect using may damage the
product even causing the injuries or property losses.

To consider the possible danger during the installation or using process of swing gate operator,
installation must strictly comply with the construction standard and electrical operating
procedure.

Before installation, please make sure that the power voltage being used matches with the supply
voltage of this product. Please check if the leakage protection switch is installed and the
grounding system is correct.

Please check if additional equipment or materials are required to meet the specific requirements.

The disposal of packaging material must be complying with the local regulation.

Please do not change any parts except for those defined under this manual. Any undefined
changes may cause the malfunction. Any damages to the product arising therefrom shall be
beyond the liability of the company.

Please do not leak water or any liquid into the controller or any other open devices. Please
disconnect the power immediately if any mentioned cases happened.

Please keep this product away from heat and open fire. Or it may damage the components; cause
the failure or other hazards.

Please make sure there is no vehicles、passengers and objects passing through while the swing
gate is moving.

Anti-clip equipment like infrared protection switch must be installed to avoid injuries to person
and property losses. The company shall not be liable for any damage or accident arising
therefrom.

The installation、using and maintenance of this product must be carried out by professionals.

Children are not allowed be touch the control devices or remote transmitters.

A warning sign must be placed somewhere on the swing gate according to the national standard.

Please keep this instruction properly for future reference.
PROFELMNET |VERO 400 DC
SAFETY INSTRUCTIONS
1