Download
Share
Print this page
Profelmnet PEGASUS-1200 Installation & Owner's Manual
  1. Manuals
  2. Brands
  3. Profelmnet Manuals
  4. Garage Door Opener
  5. PEGASUS-1200
  6. Installation & owner's manual

Profelmnet PEGASUS-1200 Installation & Owner's Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Garage Door Opener
PEGASUS 1200

Advertisement

loading
Need help?

Need help?

Do you have a question about the PEGASUS-1200 and is the answer not in the manual?

Questions and answers

Related Manuals for Profelmnet PEGASUS-1200

Summary of Contents for Profelmnet PEGASUS-1200

  • Page 1 Garage Door Opener PEGASUS 1200...
  • Page 2 INSTALLATION & OWNERS MANUAL 1. Technical Specifications Reception Power Input 220V AC ±10% 50~60Hz 433.92MHz frequency Motor 24V DC Decoding Rolling Code Transmitter Working Temperature >-20℃, <+50℃ 27A 12V Battery power Relative Humidity Globe 24V 5W ≤90℃ Courtesy Open and close force 1000N 1200N 1500N 1800N 3 minutes light time...
  • Page 3 2.2 Installing the Operator and Rail...
  • Page 4 3. Control panel 4. Optional Terminals and Connections 1 2 3 4 5 6 7 1. Power supply 24V 2. Photocell 3. Common 4. Button 5. Flash 6. Battery (-) 7. Battery (+)
  • Page 5 5.Programming the Unit The system must be checked and tested when connections are completed. 5.1) Check the chain support if it is halfway to make sure the movement is problem free in both opening and closing. Make sure that all the standards relative to the automatic gates and doors category have been observed.
  • Page 6 7. Adjustments Normally, the force settings are automatically set, and the adjustment is unnecessary. However, the force can be adjusted by an authorized professional opener installer for special purposes if it is necessary. 7.1) Press SET and hold, the LED will display a setting number from 1 to 3, release SET, it is now in force adjustment mode.

  • Page 7: To Set Auto-Close On / Off

    9.2) TO SET AUTO-CLOSE ON / OFF: 9.2.1) Press UP and hold until the LED displays – 9.2.2) Press button UP once, the auto close time increase 1 minute. Press button DOWN once,decrease the auto close time 1 minute,The LED displays the current set value. 9.2.3) The Auto Close function will be disabling when the setting time is 0.
  • Page 8 10. Owners’ Guide Attention in use At the first time of using the door, please test the driving system to see if it moves 10.1.1 well. (Test method: unlock the trolley, pull and push the door by hand.) Connected with the appropriate power and socket by professionals, and connected 10.1.2 the earthing wire with earth.