Profelmnet VERO 400 DC Manual page 10

Note

To ensure safety and protect the machines, please install a gate stopper at the open limit position
when the gate opens outward to prevent the gate from running over its travel. Meanwhile, to enable
the 2 swings to close to its accurate limit position, please install a limit stopper at the closed limit
position (as shown in figure 3). Similarly, when the gate opens inward, please install a limit stopper
at the closed limit position (as shown in figure 2).

Before installing the main machine, please make sure the main machine and components are in
good mechanical performance and the gate can be manually operated flexibly.

One control unit can optionally drive one main machine or two main machines.

Earth leakage circuit breaker must be installed on where the gate movement can be seen, and the
minimum mounting height for the control box should be over 1.5m to avoid being touched by kids.

After installation, please check whether the mechanical property is good or not, whether gate
movement is flexible or not after unlocking, and whether the infrared sensor (optional) is installed
correctly and effectively.
PROFELMNET |VERO 400 DC
10