A.O. Smith cyclone BFC - 80 Installation And Service Manual page 45

gis
Instruction manual BFC
n
min
IMD-0423 R0
6. Isolate the water heater from the power supply by putting the isolator
between the appliance and the mains power supply to position 0.
7. Shut off the gas supply (10).
8. Close the stop valve (11) in the hot water pipe.
9. Close the stop valve (4) between the water tank and the cold water inlet (A).
10. Open the drain valve (9).
11. Bleed the appliance (or installation) so that it drains completely.
0063
45