Yamaha A3000 Owner's Manual page 34

*Pressing the return key or the enter key in the Colors or Others panels
will execute [Cancel], but when the Shortcuts panel is open, pressing the
return key or the enter key will specify these keys as the shortcut key for
the currently selected action. Please use caution.
8.3.3. Others
Here you can make various other settings.
<Startup command>
Specify the command that will be executed when TWE is first started up. If
you select None, no command will be executed.
<Waveform window>
•Draw mode...
Select the drawing mode for the waveform. In order of Speedy - Smooth - Very
smooth, there will be less flicker when the waveform is drawn, but the
drawing speed will be slower.
•Waveform margin...
Specify the width of the margin on all sides of the waveform in the waveform
display, as the number of pixels.
Horizontal specifies the margin at the beginning and end of the waveform,
and Vertical specifies the upper and lower margins.
If you set these margins appropriately, it will be easier to select from the
beginning of the waveform using the mouse, and easier to check whether the
waveform extends to the maximum amplitude.
•Initial status
Specify the default state when a Waveform window is opened.
•Close on suspend...
If this is checked, all Waveform windows will disappear when you switch from
TWE to another application. When you switch back to TWE, the Waveform
windows will reappear.
•Active scrolling...
If this is checked, the display will be updated in realtime when you drag
the scroll bar indicator. On slower computers, the scroll bar will respond
better if you uncheck this item.
•Coarse waveform during playback...
If this is checked, the waveform display during playback when the [View]
menu item [Scroll during playback] is on will become approximate (i.e.,
rougher), and the recording and playback performance will become
- 20 -