Yamaha A3000 Owner's Manual page 21

6.3. Copy
This command copies the region currently selected in the waveform display to
the TWE clipboard.
6.4. Paste
This command pastes the waveform which was copied to the TWE clipboard,
starting at the specified point in the waveform display.
If waveform data already exists at the paste destination, the original data
will be overwritten and replaced by the newly pasted data. If the
overwritten area extends beyond the end of the sound data, the sound data
will be extended by that amount.
Executing the [Paste] command will not affect the contents of the clipboard.
6.5. Insert
This command inserts the waveform which was copied to the TWE clipboard,
replacing the waveform of the region that was selected in the waveform
display. The portion of the waveform following the selected region will
slide backward to make room for the inserted data.
In the case of sound data with two or more channels, the [Insert] command
can be executed only if the selected region includes all channels.
Executing the [Insert] command will not affect the contents of the
clipboard.
6.6. Clear
This command deletes the waveform in the region selected in the waveform
display. The portion following the deleted area will slide forward.
Unlike the [Cut] command, the deleted waveform will not be copied to the TWE
clipboard.
In the case of sound data of two or more channels, the [Clear] command can
be executed only if the selected region includes all channels.
6.7. Select All
This command selects the entire length (from the beginning to the end) of
the channel(s) in which a region is currently selected in the waveform
display.
- 7 -