For Cdc-905 Only; Automatic Searching For The Peak Level On A Disc - Yamaha CDC-505 Owner's Manual

AUTOMATIC SEARCHING FOR THE PEAK LEVEL ON A DISC

This convenient feature automatically searches a disc for a part where the source level peaks, and next plays the part repeatedly.
For recording to tape, this feature is very helpful to adjust the recording level on the tape deck.
SYNCHRO
2
DISC SCAN
3
1
1
Stop the unit.
2
Select the "1DISC" disc play mode.
3
Select the disc.
Notes
•
Even if the peak level search is performed twice or more on
the same disc, the same part will not be always selected,
because this unit will search for the peak level among parts
on the disc that are randomly selected by the internal
microcomputer.

for CDC-905 only

TEXT/ OPEN/
DIMMER
TIME CLOSE
TAPE CLEAR PROG
1 2 3
INDEX
+
4 5 6 I0
7 8 9 0
MODE REPEAT RANDOM
DISC SKIP SEARCH
– +
OUTPUT LEVEL SKIP
STOP PAUSE PLAY
STOP
MODE
1DISC
DISC SKIP
DISC
2 3 4
4 5 6 7 8 9
4
0
PEAK
(On the front panel)
The peak level search is performed on the disc.
Next, the part where the source level peaks is
repeatedly played. Adjust the recording level on the
tape deck listening to this repeat play.
To cancel this function
Press the STOP button.
•
In the program play mode, this feature will function among
the programmed tracks only. If program play is being
performed, first press the STOP button, and then press the
PEAK button. If program play is not being performed, only
press the PEAK button.
•
To search for the peak level through all discs on the disc
tray, in step 2, select the "5DISCS" disc play mode.
/ OPEN/CLOSE
PLAYXCHANGE
5 SKIP/SEARCH
PHONES
0 OUTPUT LEVEL
– +
PEAK
4
1DISC
10
11 12
1DISC REP
8 9 10
11 12
1DISC REP
8 9 10
11 12
21