Table of Contents
Advertisement
Configuring the MCso
Key Programming Example
This example shows how to prgoram the key sequence,
Shift F10,
to display the
following signature block at the left margin of a page:
Sincerely yours,
Stephen DeMont
1.
Enter setup mode.
2.
Invoke the Function Keys Setup menu.
3.
Press
Ctr/ F10.
4.
Press t to highlight the shifted key field.
5.
Enter the control codes for three line feeds
(LF)
and one carriage return
(CR).
The line feed control code is
Ctr/
.t,
the carriage return code is
Ctr/ M.
6.
Type Sincerely yours,
7.
Enter the control codes for five line feeds and one carriage return.
8.
Type Stephen DeMont
The definition string should look like this:
LFLFLFCRSincerely yours,LFLFLFLFLFCRStephen DeMont
11. Press
F12
to exit setup mode and return to the current emulation.
12. Now, press
Shift F10
to end your letters with your usual signature block.
Key Program Storage Limitations
Key programs are automatically saved to memory, occupying up to 1500 bytes of
memory space.
If
more
than
255 characters are entered for any key or the 1500-byte
limit is reached, the terminal will beep, warning
that
you cannot enter any more
characters.
When the terminal is set up for dual sessions, programs are limited to no more
than
7 50 characters per session.
MCao User's Guide
2-43
Advertisement
Table of Contents
