Link MC80 User Manual page 29

Configuring the MCso
Table 2-2. General Setup Menu Parameters (cont.)
Received CR
CR
CRLF
Recognize DEL
Off
On
Bell Tone
Off
1
2
3
Monitor Mode
Off
On
Virtual Terminal
Off
On
Split
Block End
US/CR
CRLF/ETX
MCRn User's Guide
When the terminal receives an ASCII carriage retrurn
(CR} character, the cursor will move to the beginning of
the:
Current llne.
Next line.
Delete (7F hexadecimal) is:
Ignored.
Interpreted as a destructive backspace. The character
to left of the cursor is deleted, and the cursor is moved
left one space.
The sound of the MCBo's bell tone is:
Disabled.
A low-pitched beep.
A medium-pitched beep.
A high-pitched beep.
The terminal:
Executes escape sequences and control codes.
Displays symbols for escape sequences and control
codes without acting on them.
When set to:
The MCso accesses only one host during a session.
The terminal accesses two hosts in full-page,
dual-session display mode.
The terminal operates in dual-session mode,
displaying both sessions concurrently.
When the terminal sends a block of data to the host::
The llne terminator Is displayed as an ASCII US
character, and the block terminator Is dis played as
an ASCII CR character.
Displays line terminators as ASCII carriage return
(CR} and line feed (LF) characters. The block
terminator is displayed as an ASCII ETX character.
2-9